Stainless Coarse Thread Screws Star Dr T17 Tip

The advantages of these decking screws are:

Flush finish.
Heads look uniform across screws, unlike Square Drive heads which need to be lined up to achieve a uniform look.

Applications: Commonly used for both soft and hardwood wide board decking up to 30mm thick.

316 Stainless

stainless steel countersunk 6 lobe particle board screw

316 Stainless

Build your deck faster with Coarse Thread Screws, Csk Rib, 6 Lobe Drive, T17 Tip.

Advantages

Meets BPIR regulation
316 stainless
Flush finish.
Star Drive allows for greater torque.
Heads look uniform across screws, unlike Square Drive heads which need to be lined up to achieve a uniform look.

Applications and Approval

Applications

Commonly used for both hardwood and softwood decking.
Tips for use:
Use 10g Quick Cut for counter sinking/drilling pilot hole.
T25 High Torque tip to drive screw.
Pre-drilling may be required and recommended for hardwood and board ends.

Note: Screw length depends on the thickness and type of the material you’re working with. Consult a Licensed Building Practitioner (LBP) to determine the best screw length for your application.

NB: These guidelines should be read in conjunction with the New Zealand Building Code (NZS3602, NZS3604, NZS3605, NZS3640 and NZS4203).

Downloads

Stainless Steel Decking Screws

Stainless Coarse Thread Screws Star Dr T17 Tip

The advantages of these decking screws are:

Flush finish.
Heads look uniform across screws, unlike Square Drive heads which need to be lined up to achieve a uniform look.

Applications: Commonly used for both soft and hardwood wide board decking up to 30mm thick.

Coarse Thread Screws, Csk Rib, 6 Lobe Drive, T17 Tip

316 Stainless

Build your deck faster with Coarse Thread Screws, Csk Rib, 6 Lobe Drive, T17 Tip.

Advantages

Meets BPIR regulation
316 stainless
Flush finish.
Star Drive allows for greater torque.
Heads look uniform across screws, unlike Square Drive heads which need to be lined up to achieve a uniform look.

Applications and Approval

Applications

Commonly used for both hardwood and softwood decking.
Tips for use:
Use 10g Quick Cut for counter sinking/drilling pilot hole.
T25 High Torque tip to drive screw.
Pre-drilling may be required and recommended for hardwood and board ends.

Note: Screw length depends on the thickness and type of the material you’re working with. Consult a Licensed Building Practitioner (LBP) to determine the best screw length for your application.

NB: These guidelines should be read in conjunction with the New Zealand Building Code (NZS3602, NZS3604, NZS3605, NZS3640 and NZS4203).

Downloads

Stainless Steel Decking Screws