12 X 180 Fischer FAZ II Plus 12/80 Zinc Anchor Bolt 564590

12 X 180 Fischer FAZ II Plus 12/80 Zinc Anchor Bolt 564590

12 X 180 Fischer FAZ II Plus 12/80 Zinc Anchor Bolt 564590

12 X 180 Fischer FAZ II Plus 12/80 Zinc Anchor Bolt 564590
DYTMZ12180FAZP
In Stock
Your cart has been updated.

12 X 180 Fischer FAZ II Plus 12/80 Zinc Anchor Bolt 564590

DYTMZ12180FAZP
In Stock
Fischer Faz II Plus Zinc
Your cart has been updated.
In Stock

FAZ II Plus Zinc Bolt Anchors have ETA (European technical assessment) that meets the NZBC requirements (NZS 3101 concrete structures standard).

Advantages

  • Carbon steel with zinc plating
  • C1/C2 seismic rating
  • For external use with 50 Year Design Life when used as described in ETA
  • Meets BPIR regulation
  • Quick and easier assembly without the need for drill hole cleaning (M8-M24).
  • With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required.
  • The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24.
  • The fast installation process of the FAZ II Plus provides an efficient fixing solution for dynamic applications with low load cycles (M16-24) with an immediately loadable fixing point.
  • The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire.
  • Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use.

Applications and Approval

Applications

  • Steel constructions
  • Guard rails
  • Consoles
  • Tunnels
  • Lifts
  • Lifting platforms
  • Conveyor belts
  • Pumps
  • Ladders
  • Cable trays
  • Machines
  • Staircases
  • Façades
  • Timber constructions

Building materials

Approved for:

  • Concrete C20/25 to C50/60, cracked and non-cracked

Also suitable for:

  • Concrete C12/15 - C80/95 (classification available)
  • Steel fiber concrete (classification available)
  • Solid sand-lime brick (classification available)

You can find detailed information on building materials in the approval document.

Approval

  • ETA-19/0520
  • DoP No. 0334
Installation
  • The FAZ II Plus is suitable for pre-positioned and push-through installation and is also ideal for stand-off installation thanks to the long thread.
  • When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall.
  • The anchor is set in line with the approval once the preset installation torque is achieved.
  • In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools.
  • Visit fischer for Technical Data and Assembly Instructions.
Downloads

Zudvx7vsgrysvyjv Fischerfixperienceproductinfo

12 X 180 Fischer FAZ II Plus 12/80 Zinc Anchor Bolt 564590

12 X 180 Fischer FAZ II Plus 12/80 Zinc Anchor Bolt 564590

12 X 180 Fischer FAZ II Plus 12/80 Zinc Anchor Bolt 564590
DYTMZ12180FAZP
In Stock
Your cart has been updated.

12 X 180 Fischer FAZ II Plus 12/80 Zinc Anchor Bolt 564590

DYTMZ12180FAZP
In Stock
Fischer Faz II Plus Zinc
Your cart has been updated.
In Stock

FAZ II Plus Zinc Bolt Anchors have ETA (European technical assessment) that meets the NZBC requirements (NZS 3101 concrete structures standard).

Advantages

  • Carbon steel with zinc plating
  • C1/C2 seismic rating
  • For external use with 50 Year Design Life when used as described in ETA
  • Meets BPIR regulation
  • Quick and easier assembly without the need for drill hole cleaning (M8-M24).
  • With the new assessment (ETA), the tensile strengths increase decisively. As a result, fewer fixing points and anchors are required.
  • The new ETA confirms the use of the FAZ II Plus for dynamic loads for diameters M16-M24.
  • The fast installation process of the FAZ II Plus provides an efficient fixing solution for dynamic applications with low load cycles (M16-24) with an immediately loadable fixing point.
  • The ETA evaluation, together with other test reports (RWS, ZTV, ETK), ensures high loads in case of fire.
  • Numerous approval certificates for different substrate materials (concrete C12/15-C80/90, steel fiber concrete, solid sand-lime brick) increase the number of applications and fields of use.

Applications and Approval

Applications

  • Steel constructions
  • Guard rails
  • Consoles
  • Tunnels
  • Lifts
  • Lifting platforms
  • Conveyor belts
  • Pumps
  • Ladders
  • Cable trays
  • Machines
  • Staircases
  • Façades
  • Timber constructions

Building materials

Approved for:

  • Concrete C20/25 to C50/60, cracked and non-cracked

Also suitable for:

  • Concrete C12/15 - C80/95 (classification available)
  • Steel fiber concrete (classification available)
  • Solid sand-lime brick (classification available)

You can find detailed information on building materials in the approval document.

Approval

  • ETA-19/0520
  • DoP No. 0334
Installation
  • The FAZ II Plus is suitable for pre-positioned and push-through installation and is also ideal for stand-off installation thanks to the long thread.
  • When applying the torque, the cone bolt is pulled into the expansion sleeve and expands it against the drill hole wall.
  • The anchor is set in line with the approval once the preset installation torque is achieved.
  • In the case of series installation, we recommend using the FABS or FA-ST II anchor bolt setting tools.
  • Visit fischer for Technical Data and Assembly Instructions.
Downloads

Zudvx7vsgrysvyjv Fischerfixperienceproductinfo

Learn Something New

To receive useful info and product updates add your details below

Anzor Wallchart

Wall Chart

Request a copy of our Engineering & Marine, or Construction Wall Chart.

Anzor Catalogues

Standard Catalogues

Click here to download a PDF of our Engineering Catalogue. This catalogue includes stainless fasteners and fittings, marine hardware and construction brackets.

Anzor Catalogues

Construction Catalogues

Click here dot download a PDF of our Construction Catalogue. This catalogue includes stainless/galvanized fasteners and fittings, and construction brackets.

You are subscribed to push notifications but they are not enabled in your browser.
Please either enable push notifications here or unsubscribe here.