3/8 BSP Red Bore 316 1 Piece Ball Valve

3/8 BSP Red Bore 316 1 Piece Ball Valve

3/8 BSP Red Bore 316 1 Piece Ball Valve

3/8 BSP Red Bore 316 1 Piece Ball Valve
VBL60101P
In Stock
Your cart has been updated.

3/8 BSP Red Bore 316 1 Piece Ball Valve

VBL60101P
In Stock
Stainless BSP 1 Piece Ball Valve
Your cart has been updated.
In Stock

Stainless Steel BSP Ball Valves are used in applications that don't require the use of sanitary grade fittings. They are also normally used in pipe applications, not tube, BSP fittings are often referred to as WOG fittings (water, oil, gas fittings).

The 1 Piece Ball Valves are the lowest cost ball valve available and are used in applications where they are only opened or closed very infrequently. They are a throw away item and the seals are not replaceable.

Advantages
  • Anzor's stainless steel ball valves have a 316 grade ball and body with 304 Gland Nut, Stem Nut, Thrust Washer and handle with PTFE stem packing and seals.
  • Ball Valves are a very versatile valve and are commonly used in industrial applications through to home brewing kits. Suitable for applications up to 1000 PSI and up to 200 degrees Celsius and available as a 1 piece ball valve, 2 piece ball valve and 3 piece ball valve.
  • Pipe thread in accordance with ANSI B2.1, BS 21-1973, DIN 259/2999, ISO 228
  • Blow-out proof stem/reduce bore
Installation

Specifications

1 Piece Ball Valve - The 1 Piece Ball Valve has a solid body that is one piece and seals can not be replaced, available from 1/4 inch BSP to 2 inch BSP.

Downloads

3/8 BSP Red Bore 316 1 Piece Ball Valve

3/8 BSP Red Bore 316 1 Piece Ball Valve

3/8 BSP Red Bore 316 1 Piece Ball Valve
VBL60101P
In Stock
Your cart has been updated.

3/8 BSP Red Bore 316 1 Piece Ball Valve

VBL60101P
In Stock
Stainless BSP 1 Piece Ball Valve
Your cart has been updated.
In Stock

Stainless Steel BSP Ball Valves are used in applications that don't require the use of sanitary grade fittings. They are also normally used in pipe applications, not tube, BSP fittings are often referred to as WOG fittings (water, oil, gas fittings).

The 1 Piece Ball Valves are the lowest cost ball valve available and are used in applications where they are only opened or closed very infrequently. They are a throw away item and the seals are not replaceable.

Advantages
  • Anzor's stainless steel ball valves have a 316 grade ball and body with 304 Gland Nut, Stem Nut, Thrust Washer and handle with PTFE stem packing and seals.
  • Ball Valves are a very versatile valve and are commonly used in industrial applications through to home brewing kits. Suitable for applications up to 1000 PSI and up to 200 degrees Celsius and available as a 1 piece ball valve, 2 piece ball valve and 3 piece ball valve.
  • Pipe thread in accordance with ANSI B2.1, BS 21-1973, DIN 259/2999, ISO 228
  • Blow-out proof stem/reduce bore
Installation

Specifications

1 Piece Ball Valve - The 1 Piece Ball Valve has a solid body that is one piece and seals can not be replaced, available from 1/4 inch BSP to 2 inch BSP.

Downloads

Learn Something New

To receive useful info and product updates add your details below

Anzor Wallchart

Wall Chart

Request a copy of our Engineering & Marine, or Construction Wall Chart.

Anzor Catalogues

Standard Catalogues

Click here to download a PDF of our Engineering Catalogue. This catalogue includes stainless fasteners and fittings, marine hardware and construction brackets.

Anzor Catalogues

Construction Catalogues

Click here dot download a PDF of our Construction Catalogue. This catalogue includes stainless/galvanized fasteners and fittings, and construction brackets.

You are subscribed to push notifications but they are not enabled in your browser.
Please either enable push notifications here or unsubscribe here.